Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.
gilbertoxyfv

Cisco 1841 & Diginet Setup

CISCO 3G WAN Interface Card for Verizon or Sprint

Registering has great advantages, like: --Win great prizes like Google Android tablets, iPads, iPods, Kindles, Laptops and more --Free support for your broadband and tech problems Results 1 to 8 of 8 1 Cisco 1841 & Diginet Setup I am very very new to this technology so please bear me out with the simple questions. I have installed a 64k diginet line at my site and at the other site. I have purchased 2 x 1841 Ciso routers one for me one for the other site. I now need to setup and connect the two together and thats where it becomes grey and blurry. The 1841 has a serial port connected to the NTU. The other company has given me their ip address that my router on their side will connect to and told me to setup the router first and then ship it down to them. So I need to know what needs to be done this side from IP addressing and Ethernet and serial setup. The router also needs to NAT. This is what info I have so far, I need to know what type of IP address range and subnets I should be using on the routers My Company Posts 14 Based on the descriptions on the cisco website for the 1841 router it has two fast ethernet interfaces so you will need to figure out how your office lan is setup first. Assuming that there is no ADSL or other connectivity at the office and that both routers are sitting on .1 of their respective subnets: On your company router your will need to get into the cisco configuration mode - assuming that you are working over the console cable here: Seeing that vb does not play nice you can go to http://www.pastie.org/private/exner6p6n1rgewwveggbnw for the router configuration bits - note that I'm just using static routes and not implementing any gateway routing protocols.
For the original version including any supplementary images or video, visit http://mybroadband.co.za/vb/showthread.php/181242-Cisco-1841-amp-Diginet-Setup

Can not Connect PC to Cisco 1841 Router!

Description The Cisco 1841 router is designed for secure data connectivity and provides significant additional value compared to prior generations of Cisco 1700 Series routers by offering more than a fivefold... More Here's our take on five of the hottest flat-panel TV features. Lab technicians Matthew Ferretti and Antonette Asedillo perform preliminary color calibrations... Read More Consumer Reports Cisco Systems Cisco 1841 Integrated Services RouterCompare Prices Tax & shipping for ZIP code: Condition: Pre-Owned Item Description The Cisco 1841 router is designed for secure data connectivity and provides significant additional value compared to prior generations of Cisco 1700 Series routers by offering more than a fivefold performance increase, integrated hardware-based encryption enabled by an optional Cisco IOS Software security image, and a dramatic increase in interface card slot performance and density while maintaining support for more than 30 existing WAN interface cards (WICs) and multiflex trunk cards (voice/WICs [VWICs]-for data only on the Cisco 1841 router) of the Cisco 1700 Series.The Cisco 1841 modular architecture has been specifically designed to meet requirements of small-to-medium-sized businesses and small enterprise branch offices as well as service provider-managed applications for concurrent services at wire-speed performance. Specifications
For the original version including any supplementary images or video, visit http://shopping.yahoo.com/4714511-cisco-systems-cisco-1841-integrated-services-router/

Cisco Systems Cisco 1841 Integrated Services Router

Can not Connect PC to Cisco 1841 Router! Cisco 1841 router Hello I have a 1841 router.It has two F/E ports.One of them is connected to an ADSL modem and the other to my PC through crossover RJ-45 cable.The problem http://www.prodec.co.uk/products/dell-powervault-md1200-das-array-12-x-hdd-installed-540-tb-installed-hdd-capacity is that the connection is not active and light are off.and also I get network disconnection icon in windows.I tested the PC with other networks and everything is fine.I even tried couple of network cards and all with the same result. Can please someone help me? The interesting point is that when I connect the F/E port to an Sun server the light become on!! Thanks Software/Hardware used:
For the original version including any supplementary images or video, visit http://itknowledgeexchange.techtarget.com/itanswers/can-not-connect-pc-to-cisco-1841-router/

Enterprises are looking for ways to reduce costs, increase revenue, and improve business continuity. The Cisco 3G WWAN HWICs, when coupled with a service provider wireless data plan, provide a cost-effective, rapidly deployable, reliable, and secure backup solution for remote sites and branch offices. With data rates approaching T1 speeds, 3G Networks provide an alternative to wireline backup solutions such as ISDN, cable, and DSL. In the event of a network failure, the Cisco Integrated Services Router routes mission-critical data to the Cisco 3G WWAN HWIC for transmission across the wireless infrastructure. In addition, the router can distinguish different types of traffic and allow only mission-critical traffic to flow over the backup interface. The 3G Wireless WAN HWICs are available in two different SKUs. The CDMA SKU is called HWIC-3G-CDMA-x HWIC-3G-CDMA-V (Verizon) HWIC-3G-CDMA-S (Sprint) Primary Connectivity For applications that have low data usage but high security requirements such as bank ATMs, gas station kiosks, and telemetry sites, the Cisco 3G WWAN HWIC offers a secure, simplified, and cost-effective WAN alternative to DSL or Frame Relay. In areas where terrestrial broadband services (cable, DSL, or T1) are not available or are expensive, 3G WWAN connectivity can be a viable alternative.
For the original version including any supplementary images or video, visit http://www.evdoinfo.com/content/view/1945/64/

Don't be the product, buy the product!

Schweinderl